Be based on the testing system of cutting tool damaged of laser

  • Time:
  • Click:203
  • source:KAIHER CNC Machining
Renishaw company uses the cutting tool that its have to identify a technology, the testing system of cutting tool damaged that development gave a kind to be based on laser technology -- TRS1 cutting tool identifies a system. This system can discern below condition of high speed cutting cutting tool damaged. The application of accurate laser makes this system can detect the diameter is small to 0.

019 ″ (about 0.

5mm) tiny cutting tool, detect place of damaged cutting tool is less than 1 second with time. This system has very good versatility, apply to arrive from large machining center small-sized drilling machine inside machine tools of all sorts of CNC numerical control. Systematic design is very compact, the size that measures a head is 1.

5 ″ (wide) × 2.

87 ″ (thick) × 3.

27 ″ (tall) . Measure a head to be able to install the machine tool in any tigidity apparently right cutting tool undertakes monitoring, the working range that measures a head can amount to 12 ″ ～ 79 ″ (300 ～ 2000mm) . CNC Milling