BMT 200 cutting tool / knife handle balancing machine

  • Time:
  • Click:210
  • source:KAIHER CNC Machining
The BMT 200 portable cutting tool of new development of company of Rego-Fix of BMT 200 balancing machine / Swiss type high accuracy, will broad suitable scope and the characteristic that use easily link knife handle balancing machine together. This chance construction is deft, underweight 40 kilograms; Can balance almost the knife handle of any taper model or dimension; Do not have special requirement to base, need to be put in a steady work to be able to be used apparently only. This balancing machine used a kind to call " soft bearing " main shaft designs new technology, measure lighter, volume because of this and proportion of other type photograph smaller. The balancing machine of other is to measure power, and BMT 200 balancing machine is to measure vibration. "Soft bearing " design technology can is aimed at install a knife to part every time calibration, handlers but the balancing machine of set of proper motion of cutting tool type with different basis. No matter be small-sized cutting tool or large cutting tool, no matter be in,be quickened or below decelerate condition, and when needing many sensor reading, this machine has good applicability. BMT 200 balancing machine uses the feeling screen that operates easily, offerred all standards to balance a method, include weight balance, angle balance, radial bore, axial bore, milling and fixed deserve to wait again. Balance a method to these all but fast, build cutting tool database conveniently. Rego-Fix company still rolls out balance annulus system of link of a kind of balance, can improve standard knife handle at any time to balance a system. Balance link system need not use cutting tool and heavy ball, aleatoric G can be pressed to grade is balanced and assemble knife handle below the rotate speed of 42000r/min. In addition, this balance annulus can turn 360 ° , random adjustment weight is configured. The major balancing machine that this balance annulus can make work with city matchs each other. Through using balancing machine and balance annulus, the user can prolong the service life of cutting tool and main shaft bearing, improve treatment the surface is bright and clean degree, increase the load that cut bits. CNC Milling