Yi Sika extended series of lever of penknife of the aperture inside PICCO

  • Time:
  • Click:234
  • source:KAIHER CNC Machining
Yi Sika pays close attention to treatment application spot from beginning to end. Be aimed at alveolus diameter to machine, yi Sika updates the aperture inside PICCO whole hard alloy to machine series continuously, for what differ inside the solution that Kong Jia is versed in difficult problem offers innovation. Yi Sika is newest be aimed at the following inside 3 difficulty that Kong Jia is versed in, offer innovatory solution: Machine face of blind hole bottom; How to bore hole in much direction in treatment, obtain bigger cutting deepness; What how realize cutting tool diameter and aperture is much better match. Match more adjacently when cutting tool norms and treatment aperture, treatment efficiency is taller. Good case is, diameter and length can get matching very well. 　 of lever of penknife of Yi Sika PICCOCUT 1.

Be aimed at face of blind hole bottom to machine, yi Sika rolls out PICCO 050.

20 penknives lever. To point of front cutting blade, did improve, will groovy 8 ° are obliquitous, improve for 20 ° dip. Of obliquitous degree increase, opened a space for cutting tool and blind aperture underside, make a bits fluenter, the smallest change cut bits to be repeated the possibility of cutting, brought flatness of face of blind hole bottom then rise. Penknife lever clip holds petiole diameter to divide for 4.

0 Mm and 5.

0 Mm two kinds, machine bore diameter from aperture of the smallest treatment 2.

0 Mm rises. 2.

How to bore hole in much direction in treatment, obtain bigger cutting deepness: New supplementary PICCO 060.

7, take horny function, can realize much direction to bore hole, when the smallest treatment bore diameter is 6.

When 8 Mm, its can be amounted to most cut deep 40 Mm, and original standard arbor can be amounted to most cut deep 19 Mm; Can choose PICCO 060 only originally.

5, machine bore diameter 5-6.

8 Mm, to make between cutting tool and aperture match much better, new supplementary PICCO 060.

6, when the smallest treatment bore diameter uprights at 6- 6.

8 Mm, can choose this brawnier arbor, and its can be amounted to cut deep cost bigger also. 3.

What how realize cutting tool diameter and aperture is much better match: For example, PICCO 050 series, aperture of covered the smallest treatment is 0.

60-6.

00 Mm. New aperture of the smallest treatment is supplementary arbor respectively 0.

8, 2.

5, 3.

5 Mm, those who be diameter of implementation cutting tool and treatment aperture is much better match offerred an alternative. Lever of turning of the aperture inside all PICCO 050, penknife pouring wine cup, its place meet an emergency of homogeneous phase of length of the petiole that hold a knife to change, match with optimizing what arbor and workpiece machine aperture better. Series of all PICCO penknife lever, all offer left hand and right hand arbor at the same time. Alloy brand is IC900, this is the PVD coating name with a kind of good versatility. Thin PVD coating, be helpful for holding matrix cutting blade optimal geometry body. CNC Milling